Metal and contaminant detection consulting in Sri Lanka
Metal detection consulting and training, on contaminant detection only: choose the right metal detection, food X-ray, AI colour sorting or metal separation before you build or buy, plan how it goes into your line, and prepare your team to run it. Take clear, reasoned options to your capex committee. Hourly sessions with Indika Mahaganiachchige, MSc Digital Transformation and SLAERC-trained Radiation Protection Officer.
Launch rate LKR 25,000 + VAT per hour
Book a consultation
Message us on WhatsApp.We're online now
Chat on WhatsApp- Talk directly to our engineers
- Price and options for your site
- No obligation
Need a formal quotation by email? Use our quote form
Book a consultation
Tell us about your project. No obligation.
What this service covers
PBS consulting and training is about contaminant detection only. It is not consulting or training on your whole quality assurance system.
Covered
- Choosing contaminant detection technology: metal detection, X-ray inspection, AI colour sorting and metal separation
- Implementation planning: inspection points, space on the line, sensitivity targets, test routines and detection records
- Adoption and change management: preparing operators, supervisors and QA staff to run the new detection process
- Radiation safety training for X-ray inspection
Not covered
- Building, auditing or certifying your whole quality assurance or food safety system, such as HACCP, ISO 22000, FSSC 22000 or BRCGS
- General quality assurance, food safety or quality management training
For those, work with a quality assurance or food safety consultant. We can work alongside them on the detection part.
Most factories buy a detector after production starts
By then the layout is fixed, the conveyor is too short and the budget is spent. The cheapest time to get contaminant control right is on the drawing board.
- Product and process idea
- Factory layout and line design
Best time to plan detection - Machines ordered
- Installation
- Production starts
When most buy a detector - First buyer audit
Bought after production starts
- No straight run, space or reject bin position left on the line
- Chosen from a brochure, not from your product, pack and temperature
- Salty, wet or hot product causes false rejects, so the sensitivity gets turned down
- A metal lid or foil pack blocks the detector you just bought
- The auditor asks for a control point and records you never designed
Planned at design stage: iQA by design
- The inspection point is drawn into the layout, with space for rejects
- Technology matched to your product, pack, temperature and hazard analysis
- Sensitivity targets, test routine and records agreed before the first shift
- Capex sized once, with options your board can compare
- Operators and QA staff trained on the detection routine before go-live
iQA by design means contaminant inspection, with AI where it helps, is planned with the factory, not added after it.
The detection decisions buyers find hardest
There is no single best detector. There is a right one for your product, pack, temperature and line. These are the questions we answer before you spend.
Metal lids and cans
A metal detector cannot see inside a metal container, because the container is metal too.
Typical options: inspect before the lid goes on, or use X-ray after sealing.
Aluminium foil lids and foil packs
Foil limits what a standard metal detector can find, and the right answer depends on which metals you must catch.
Typical options: inspect before sealing, a ferrous-in-foil detector (ferrous metal only), or X-ray for all metals, glass and stone.
Hot products
A product’s signal in a metal detector changes with temperature, so a machine set up on cool product can false reject hot product, or miss metal in it.
Typical options: set the machine up at running temperature, at a point on the line where temperature is stable.
Frozen and chilled products
Fully frozen product is usually easy to inspect. Product that is thawing is not, because its signal keeps changing.
Typical options: choose the inspection point in the cold chain with care, and match the set-up to it.
Seafood, meat and salty products
Salt and moisture make a product conductive. The product effect this creates can hide small metal, especially stainless steel.
Typical options: multi-frequency metal detection, careful set-up, or X-ray, which also finds bone.
Chutney, pickles and sauces
Wet, salty, often acidic, and usually packed in glass jars with metal caps.
Typical options: pipeline metal detection before filling, and X-ray after filling to find glass and metal.
Liquids, pastes and powders
Product that is pumped or free-flowing can be inspected in the flow, before it is packed.
Typical options: pipeline metal detectors for pumped product; free-fall detectors and metal separators for powders and granules.
Tea, spices, nuts and coconut
Dry products suit metal detectors well, but hair, insects, stones and discoloured pieces are not metal.
Typical options: AI UHD colour sorting for foreign matter and defects, with metal detection or X-ray at packing.
If a simpler, lower-cost machine is enough for your line, we will tell you.
Consulting and training programmes
Book a single hour for one decision, or a programme for your whole team. Every programme is about contaminant detection only.
Choosing contaminant detection
Choosing the technology, placing inspection points, setting sensitivity targets, test routines, reject handling and the records auditors ask for.
Food X-ray inspection
What the latest AI-driven X-ray systems find, where they fit on your line, and when they are worth the investment over a metal detector.
AI UHD colour sorting
What AI sorting removes from tea, spices, coconut, nuts and grains, how to size it for your capacity, and how to judge yield against rejects.
Liquid, paste and powder lines
Pipeline metal detectors, free-fall detectors and metal separators for pumped and free-flowing products.
AI in contaminant detection
Where AI adds value in detection: image-based inspection, reject and test data, trend alerts and digital detection records.
Radiation safety
For X-ray operators, security teams and Radiation Protection Officers: safe operation, safety culture, emergency handling and SLAERC requirements.
Adoption and change management
Bringing operators, supervisors and QA staff with you when contaminant checks move from people to machines and AI.
From manual to automated inspection
Mapping people-dependent inspection steps, then deciding which to automate, which to support with AI and which to keep manual.
For startups, SMEs and large manufacturers
Startups
Planning your first factory or line? Get the inspection point, the technology and the budget right the first time.
SMEs
Growing, exporting or facing a new buyer audit? Upgrade in the right order and spend only where the risk is.
Large companies
New plants, multi-line upgrades and capex committees: reasoned options for every line, compared the same way.
Decide on evidence, not gut feeling
A detector bought on a hunch is often the wrong one, and the wrong one costs twice: once to buy and again to replace.
Consulting gives you the reasoning before the money is committed, so a capex request is approved because the case is clear, not because someone feels sure. The decision stays yours.
What you take to your capex meeting
The contaminants your line must control, and where they come from.
Each technology’s strengths and limits, stated honestly.
Where each machine goes, and the space and services it needs.
Sensitivity targets, a test routine and the records to keep.
An indicative budget for each option, and whether to buy outright or through leasing or hire purchase.
Who runs it, who checks it and who is trained.
Your resource person
Indika Mahaganiachchige
Chief Technology Officer · Specialist, Digital Transformation
Leads needs analysis, solution design and project management on every PBS installation, and the radiation safety side of X-ray projects.
- MSc Digital Transformation, London Metropolitan University
- Doctor of Business Administration, in progress: doctoral candidate, University of the West of Scotland
- Radiation Protection Officer, trained by the Sri Lanka Atomic Energy Regulatory Council (SLAERC) in cabinet X-ray safety, the legal framework and e-licensing; certificate valid to October 2031, available for verification on request
- 25 years in industry: 14 in financial solutions, 11 in digital transformation and industrial technology solutions
Why it matters for your project
14 years in financial solutions means your options are set out the way a capex committee reads them: risk, cost and return.
Digital transformation brings AI, data and change management into the plan from the start.
X-ray projects are planned with SLAERC licensing and safety in mind from day one.
His doctoral research studies how manufacturers adopt Industry 5.0 detection and security technologies.
Senior technicians in electronics, electrical and mechanical engineering install and service what is planned.
Why do companies like these choose PBS?
Tea, spice and meat processors, manufacturers, engineering firms, hotels and well-known brands across Sri Lanka use inspection and screening equipment supplied by PBS. Here is why, and what consulting now puts to work on your project before you buy.












Experience across very different products
Dry tea and spices, wet and salty seafood and meat, and security screening each behave differently. PBS supplies all of them.
Advice from the people who install
The team that recommends your solution installs it, commissions it on your product and services it.
Honest about what you need
If a conveyor metal detector is enough, we say so. If you need X-ray, we show you why.
Since 2009
Supplying, installing and servicing inspection equipment across Sri Lanka.
How booking works
- Tell us about your project. Your product, pack and line, and the decision you need to make.
- We agree the scope and hours. And a time that suits your team.
- Consulting or training session. At your factory or online.
- Your recommendation. Clear options, with a written decision report if you need one.
- When you are ready. PBS can supply and install the solution you choose, bought outright or through leasing or hire purchase.
+ VAT per hour
- Contaminant detection consulting and training sessions
- At your factory or online
- One hour for one decision, or a full programme for your team
- Written decision report on request, at the same hourly rate
- Radiation safety training is free with every PBS X-ray project
Launch rate for early bookings. Prices exclude VAT. Conditions apply.
Contaminant detection consulting: common questions
Is this metal detection consulting?
Yes. Metal detection is the core of the service, and the same hourly consulting covers every contaminant detection technology: AI-driven metal detection, AI-driven food X-ray inspection, AI UHD colour sorting and metal separation, plus IoT-based, data-driven contaminant management that logs every pass and reject for your buyers and auditors.
How much does contaminant detection consulting cost in Sri Lanka?
PBS contaminant detection consulting and training is LKR 25,000 + VAT per hour, a launch rate for early bookings. You book only the hours your project needs. Conditions apply.
Do you provide consulting or training on our whole quality assurance system?
No. PBS consulting and training covers contaminant detection only: choosing the detection technology, planning its implementation, and managing the change for your team. We do not build, audit or train on complete quality assurance or food safety systems such as HACCP, ISO 22000, FSSC 22000 or BRCGS.
When should a new factory plan its contaminant detection?
At the design stage, before the factory layout is fixed and before machines are ordered. That is when the inspection point, the space for rejects and the right technology cost the least to get right. Adding a detector after production starts often means compromises on space, position and sensitivity.
Can a metal detector inspect products with metal lids or in cans?
No. A metal detector cannot see through a metal container, because the container itself is metal. Products in cans or with metal lids are inspected before the lid goes on, or with an X-ray inspection system after sealing.
Which detection technology suits aluminium foil lids and foil packs?
Foil reduces what a standard metal detector can do. The usual options are to inspect before sealing, to use a ferrous-in-foil metal detector, which finds ferrous metal only, or to use X-ray inspection, which finds all metals as well as glass, stone and bone. The right choice depends on your product and the contaminants in your hazard analysis.
Why do seafood, salty products, chutney and pickles cause false rejects?
Salt and moisture make a product electrically conductive, so it creates its own signal in a metal detector, called product effect. That signal can hide small pieces of metal, especially stainless steel, or trigger false rejects. Multi-frequency metal detection, careful set-up or X-ray inspection are the usual answers.
Does product temperature affect metal detection?
Yes. A product’s signal changes with temperature, so hot, chilled, frozen and thawing products behave differently in a metal detector. The machine must be set up for the temperature at the inspection point, and that point should be where the temperature is stable.
How is metal removed from liquids, pastes and powders?
Pumped liquids, pastes and sauces are inspected in the pipe with a pipeline metal detector. Free-flowing powders and granules are inspected as they fall, with a free-fall metal detector or a metal separator that rejects the metal from the flow.
Do you offer radiation safety training?
Yes. Radiation safety training for X-ray operators, security teams and Radiation Protection Officers covers safe operation, safety culture, emergency handling and Sri Lankan regulation. It is free with every PBS X-ray project, and available to other organisations at the hourly rate.
How can AI help contaminant detection?
AI can check X-ray and camera images faster and more consistently than people, sort product by colour and shape, and find patterns in reject and test records. The consulting shows where AI adds value in contaminant detection on your line, what data it needs and how your team works with it.
Who is the consultant?
Indika Mahaganiachchige, Chief Technology Officer and Specialist, Digital Transformation at PBS. He holds an MSc in Digital Transformation from London Metropolitan University, is a doctoral candidate (Doctor of Business Administration) at the University of the West of Scotland, and is a Radiation Protection Officer trained by the Sri Lanka Atomic Energy Regulatory Council.
Is the consulting only for food factories?
No. It also covers metal and foreign-body detection for pharmaceuticals, garments and textiles and plastics, screening technology for security, and moving people-dependent inspection steps to automation or AI. Startups, SMEs and large companies can all book.
Will consulting help us get capex approval?
It gives your board or capex committee what it needs to decide on evidence: the options side by side, the risks each one controls, the space and people it needs, and an indicative budget. The decision stays yours.
Request a formal quotation
Three quick details are enough to start. Add your product, pack and line speed if you have them and the quote will be exact. Your price is quoted for your exact project, so you never pay for options you do not need.
WhatsApp: 077 132 3424Call: 077 132 3424Email: pbs.metaldetectors@gmail.comBook an engineer visit →Book a consultation →