Foreign body detection in food: how Sri Lankan factories find contaminants
Foreign bodies, also called foreign objects or physical contaminants, are the complaints export buyers take most seriously. This guide explains which technology finds which contaminant, where each belongs on a bulk or packed food line, what AI adds, and how to prove control to an auditor.
Ask an engineer
Message us on WhatsApp.We're online now
Chat on WhatsApp- Talk directly to our engineers
- Price and options for your site
- No obligation
Need a formal quotation by email? Use our quote form
Get Quote now
Three details. No obligation.
The short answer
No single machine finds every foreign body. A metal detector finds metal. A food X-ray finds metal and other dense contaminants such as glass, stone, bone and ceramic, also inside foil packs and cans. An optical or AI colour sorter removes stones, discoloured product, hair, insects and fine foreign matter from bulk product such as tea, spices, coconut and nuts. Most Sri Lankan export lines combine two or more of these, chosen from the factory’s hazard analysis, and keep records that prove each one works.
Common foreign bodies and what finds them
Start with what could realistically get into your product, and where it would come from. The technology follows from that.
| Contaminant | Typical source | What finds it |
|---|---|---|
| Metal (ferrous, non-ferrous, stainless steel) | Worn machine parts, screens, blades, wire, tools | Metal detector, food X-ray, metal separator |
| Glass | Jars and bottles, light fittings, windows | Food X-ray |
| Stone and grit | Dried produce, spices, tea, grains | Food X-ray, colour sorter |
| Bone | Fish, seafood and meat | Food X-ray |
| Ceramic and hard plastic | Utensils, containers, equipment parts | Food X-ray (dense materials only) |
| Hair, insects and fine foreign matter | Raw material, handling, storage | AI UHD colour sorter |
| Discoloured or defective product | Raw material quality | Colour sorter |
What a machine finds on your line depends on the product, the pack and how different the contaminant is from the food. That is why PBS sets every system up on your actual product, and states the agreed detection levels in the written quotation rather than publishing figures.
Bulk food: foreign object detection before packing
Finding contamination early is cheaper than finding it in a finished pack, and it protects the machines further down the line.
- Free-fall metal detectors inspect powders, granules and small pieces as they drop through a vertical pipe, and reject the contaminated portion automatically.
- Gravity metal separators remove metal from free-flowing bulk product before it reaches mills, fillers or packing machines.
- Pipeline metal detectors inspect pumped liquids, sauces and pastes inside the pipe.
- Optical colour sorters and the AI UHD colour sorter remove stones, discoloured product, hair, insects and fine foreign matter from tea, spices, coconut and nuts.
Packed food: the final check
The last inspection point checks the product in the form your buyer receives.
- Conveyor metal detectors inspect packed and unpacked product on a belt, with an automatic reject and a lockable reject bin.
- Food X-ray inspection finds metal, glass, stone and bone in finished packs, including foil, metallised film, cans and glass jars.
- A checkweigher and metal detector combination checks contamination and pack weight at one point on the line.
Not sure whether you need a metal detector, X-ray or both? See metal detector vs X-ray for food.
Where AI and Industry 5.0 come in
Artificial intelligence is changing contaminant detection in three practical ways. AI X-ray inspection uses image recognition that learns your product, which helps reduce false rejects. AI-driven metal detection adapts to product effect. AI UHD colour sorting removes contaminants too fine for conventional sorters. Together with pass and reject data recorded by lot, line, shift and hour, this is what Industry 5.0 looks like on a food line: smart machines doing the repetitive looking, and your QA team making the decisions. Read more on Industry 5.0 contaminant detection and in our article on X-ray food inspection for Sri Lankan exporters.
How to choose: start from your hazard analysis
- List the physical hazards your HACCP plan identifies for each product and where they enter the process.
- Note the product and the pack: bulk or packed, dry or wet, foil, metallised film, cans or glass.
- Check your buyers’ requirements: retailers and importers often set their own foreign body controls in supplier specifications.
- Match the technology to each hazard and to the right point on the line, then plan the checks and records.
An engineer site visit (LKR 25,000 + VAT, paid before the site inspection and then deducted from your final invoice amount) gives you a written site report and recommendations. For planning help without a visit, contaminant detection consulting is LKR 25,000 + VAT per hour.
Proving control to auditors and buyers
Global food safety standards such as BRCGS Food Safety expect foreign body detection equipment chosen on the basis of risk, tested regularly and backed by records. In practice that means:
- Routine tests with certified test pieces at start-up, at set intervals and after product changes
- Written records of every check, every reject and the action taken
- Calibration and service by a technician, with an annual service plan
- Everything in one place with the audit-ready package
How PBS helps
PBS is an independent Sri Lankan brand, not bound to any foreign manufacturer, so we choose the technology and model for each project, set it up on your actual product and train your team on the checks and records.
Calibration, repair and certified test cards for detectors and colour sorters already on your line, whoever supplied them. Service, repair and calibration.
Sources
Foreign body detection: common questions
What is foreign body detection in food?
Foreign body detection, also called foreign object or physical contaminant detection, is the inspection that finds unwanted material in food, such as metal, glass, stone, bone, hard plastic, hair or insects, and removes the affected product before it reaches the customer.
Can one machine detect every foreign body?
No. A metal detector finds metal. A food X-ray finds metal and other dense contaminants such as glass, stone, bone and ceramic, also inside foil and cans. A colour sorter removes stones, discoloured product, hair, insects and fine foreign matter from bulk product. Most export lines combine two or more, chosen from the hazard analysis.
How do you detect foreign objects in bulk food?
Before packing, bulk product is inspected while it moves: free-fall metal detectors and gravity metal separators for powders and granules, pipeline metal detectors for pumped liquids and pastes, and optical or AI colour sorters for tea, spices, coconut and nuts. Finding contamination early also protects downstream machines.
Can X-ray inspection detect plastic in food?
Only some hard, dense plastics. X-ray finds contaminants that are denser than the food around them, so it reliably finds metal, glass, stone, bone and ceramic, but soft and low-density plastics are difficult to see. Where plastic is a real hazard, prevention at source and the right combination of technologies matter.
How do we prove foreign body control to an auditor?
Show equipment chosen from your hazard analysis, routine tests with certified test pieces at start-up and at set intervals, written records of every check and reject, and calibration and service by a technician. PBS supplies certified test cards and an audit-ready package for this.
Request a formal quotation
Three quick details are enough to start. Add your product, pack and line speed if you have them and the quote will be exact. Your price is quoted for your exact project, so you never pay for options you do not need.
WhatsApp: 077 132 3424Call: 077 132 3424Email: pbs.metaldetectors@gmail.comBook an engineer visit →Book a consultation →