Metal detectors for tea factories in Sri Lanka
Made tea passes through cutters, sifters and conveyors before it is packed, and metal parts wear and break. A detector at the right point turns that risk into a recorded reject.
Get price & brochure
Sent to your WhatsApp.We're online now
Get it on WhatsApp- Brochure for metal detectors for tea factories
- Price and options for your site
- Free advice from our engineers
Need a formal quotation by email? Use our quote form
Get Quote now
Three details. No obligation.
Why a tea factory needs a metal detector
Made tea passes through rollers, cutters, sifters, sorters and conveyors before it is packed. Every one of those machines has moving metal parts, and parts wear, work loose and break. A fragment that leaves a cutter does not stop at the next stage; it travels with the leaf into the chest, the blend and the pack.
For an exporter the cost is rarely the fragment itself. It is the buyer complaint, the held container, the recall of a blend that has already been shipped and the audit finding that follows. A metal detector at the right point on the line turns that risk into a recorded reject and a traceable test result.
PBS has supplied and serviced contaminant detection for Sri Lankan tea and spice processors since 2009. Its food clients include Venture Tea (Pvt) Ltd, Imperial Teas (Pvt) Ltd, Imperial Spices (Pvt) Ltd, Cinnatopia (Pvt) Ltd and Joint Agri Products Ceylon (Pvt) Ltd.
Where the detector goes on a tea line
This catches fragments shed by the machinery that does the most damage to metal parts, before they are mixed through a whole blend.
Where made tea falls freely through a chute, a free-fall metal detector inspects the stream without a belt and rejects with a fast flap.
A conveyor metal detector checks finished packs, cartons or sacks as the last gate before despatch.
Where a chute feeds a hopper, a gravity metal separator both detects and diverts.
The last inspection point before despatch is the one your buyer cares about most, because it is the only one that covers everything the factory did. Inspecting earlier as well is what stops a single fragment contaminating a large blend.
What auditors ask a tea factory
- Is detection a documented critical control point? With a defined action when the detector rejects.
- How often is it verified, and with what? Certified test cards in ferrous, non-ferrous and stainless steel, passed through at the start and end of a shift and at a set interval in between.
- Are the test results recorded and retrievable? By lot, line, shift and hour, for the period your buyer specifies.
- Who calibrated the machine, and when? With a signed service report, not a verbal assurance.
- What happens to rejected product? Into a lockable reject bin, reviewed, not quietly tipped back in.
PBS sets this up with you rather than leaving you to work it out before an audit. See the audit-ready inspection package and how often a metal detector should be calibrated.
What PBS brings to a tea factory
Sensitivity is set and proven on your actual product at commissioning, not quoted from a brochure. Dry leaf, dust grades and flavoured teas do not behave the same way.
LKR 25,000 + VAT per card with a PDF certificate and free islandwide delivery, for any brand of detector.
Installation, calibration and service by PBS engineers from Colombo, islandwide, for machines PBS supplied and for machines you already own.
LKR 25,000 + VAT, paid before the site inspection and then deducted from your final invoice amount. You receive a written site report and a quotation.
Metal is not the only contaminant in tea
A metal detector finds metal. It does not find hair, insects, string, plastic or stone, and those are the complaints that most often come back from a tea buyer. For loose made tea an AI UHD colour sorter removes hair, insects and fine foreign matter from the belt, and food X-ray inspection finds glass, stone, bone and dense plastic that a metal detector cannot see. Which of these a factory needs depends on its grades, its packing and its buyers.
If you are weighing up the options, read metal detector versus X-ray for food inspection, or book an engineer to look at your line. Prices for production-line machines are given on request, in writing. See also contaminant detection for food factories and the industrial metal detector buying guide.
Common questions
Does a tea factory in Sri Lanka need a metal detector?
If you export, or supply a retailer or brand that audits you, in practice yes. Made tea passes through cutters, sifters and conveyors whose metal parts wear and break, and buyers expect a documented detection point with recorded test results rather than an assurance that it has never happened.
Where should the metal detector go on a tea line?
The usual answer is two places: after sifting and cutting so a fragment does not travel into a whole blend, and at final packing as the last gate before despatch. Where tea falls freely through a chute a free-fall detector suits the loose flow; finished packs, cartons and sacks are checked on a conveyor detector.
How much does a metal detector for a tea factory cost in Sri Lanka?
Production-line machines are quoted on request. The price depends on the detection opening your packs need, the reject arrangement and the build, so PBS quotes each line after checking your product and replies. Full specifications for the machine PBS selects are set out in the written quotation.
Will the detector work on dust grades and flavoured teas?
It has to be proven on your own product, which is why PBS sets sensitivity on your actual tea at commissioning rather than quoting a figure from a brochure. Dry leaf, dust grades and flavoured or blended teas do not all behave the same way through a detector.
What records will an auditor want to see?
That detection is a documented control point with a defined action on a reject; verification with certified ferrous, non-ferrous and stainless steel test cards at the start and end of each shift and at a set interval between; results recorded and retrievable by lot, line, shift and hour; and a signed calibration report from whoever services the machine.
Can PBS service a detector we already bought from someone else?
Yes. PBS services, repairs and calibrates any brand of industrial metal detector, including machines bought from other suppliers or imported directly by the factory, and issues a signed service report laid out for BRCGS, FSSC 22000, ISO 22000 and HACCP audits.
What about hair, insects and plastic in tea?
A metal detector cannot find them. An AI UHD colour sorter removes hair, insects and fine foreign matter from loose made tea on the belt, and food X-ray inspection finds glass, stone, bone and dense plastic. Which a factory needs depends on its grades, its packing and its buyers.
Comparing metal detector suppliers in Sri Lanka? Our guide sets out the eight questions worth asking before you order, from who comes when the machine stops to what records it produces.
Request a formal quotation
Three quick details are enough to start. Add your product, pack and line speed if you have them and the quote will be exact. Your price is quoted for your exact project, so you never pay for options you do not need.
WhatsApp: 077 132 3424Call: 077 132 3424Email: pbs.metaldetectors@gmail.comBook an engineer visit →Book a consultation →