How often should a metal detector be calibrated?
Two different jobs are often both called calibration. Your operators test the detector with certified test pieces every day, and a technician services and calibrates it on a schedule. Auditors check both, so you need a plan for each.
Get calibration help
Message us on WhatsApp.We're online now
Chat on WhatsApp- Talk directly to our engineers
- Price and options for your site
- No obligation
Need a formal quotation by email? Use our quote form
Get Quote now
Three details. No obligation.
Short answer
Test the detector with certified test pieces at the start and end of every production run, at set intervals during the run, and after every product change, stoppage or repair. Have a technician service and calibrate it at least once a year, and every six or three months for high-risk products or heavy use. Your HACCP team, and your buyer’s code if you have one, set the exact frequency.
Daily verification: done by your operators
Verification checks that the detector still finds and rejects metal at the sensitivity you set. An operator passes certified ferrous, non-ferrous and stainless steel test pieces through the detector, in or on a real pack of your product, and confirms that each one is detected and rejected.
Most food-safety standards leave the frequency to your HACCP team, based on risk. Common practice is to test:
- At the start and end of each production run or shift
- At regular intervals during the run, often every one to two hours
- After every product or pack-size change
- After a stoppage, a breakdown or maintenance work
- Whenever the detector settings are changed
Record every test: date and time, product, detector, the test pieces used and their certificate numbers, the result and who did it. If a test fails, hold everything produced since the last good test and re-inspect it before it ships.
Calibration and service: done by a technician
Calibration sets the detector up correctly for each product, checks its sensitivity and reject system with certified test pieces, and records the result. A service visit adds cleaning and mechanical and electrical checks of the detector head, conveyor, belt and reject device. How often depends on your risk:
- Once a year for lower-risk lines and machines in good condition
- Every six months for food and pharmaceutical lines, or when a buyer or auditor asks for more than one check a year
- Every three months for high-risk products, heavy use and older machines
Also recalibrate when you add a new product, change the pack size or packaging material, move the detector, or after a major repair.
What an auditor will ask to see
- A documented testing procedure and frequency, approved by your HACCP team
- Certified test pieces in good condition, with their certificates
- Test records with no gaps, signed by the person who did each test
- Records of corrective action whenever a test failed
- Service and calibration reports from a competent technician
- Training records for the operators who run the tests
Signs your detector needs attention now
- Test pieces are missed, or detected only in some positions
- False rejects rise without any change in the product
- The reject device misses the pack it should remove
- The detector has not been calibrated since a product or pack change
PBS can take this off your list
Visits once a year, every six months or every three months, with calibration and a service report each time. See service plans.
Ferrous, non-ferrous and stainless steel, 0.5 to 5.0 mm, each with a PDF certificate. See test cards.
We service and calibrate detectors from any supplier, including units you imported directly. Book a service.
Calibration: common questions
Is daily testing the same as calibration?
No. Daily testing by your operators verifies that the detector still finds and rejects metal. Calibration by a technician sets the detector up for each product, checks its sensitivity and reject system, and is done on a schedule.
How often should we test during production?
Your HACCP team decides, based on risk. Many factories test at the start and end of each run, every one to two hours in between, and after any product change, stoppage or repair. Follow your buyer's code if it is stricter.
What happens if a test fails?
Stop the line, hold all product made since the last good test, find and fix the cause, and re-inspect the held product before it is released. Record each step.
Can PBS calibrate a detector bought from another supplier?
Yes. We service and calibrate detectors from any supplier, including units you imported directly, and give you a service report for your audit file.
Request a formal quotation
Three quick details are enough to start. Add your product, pack and line speed if you have them and the quote will be exact. Your price is quoted for your exact project, so you never pay for options you do not need.
WhatsApp: 077 132 3424Call: 077 132 3424Email: pbs.metaldetectors@gmail.comBook an engineer visit →Book a consultation →