What test cards does a metal detector audit require?
Auditors expect you to test your detector with certified test pieces in three metal types, in sizes that suit your product and your detector. Here is how to choose them, use them and keep the records right.
Get price & details
Sent to your WhatsApp.We're online now
Get it on WhatsApp- Price and details for certified metal detector test cards
- Options that suit your site
- Free advice from our engineers
Need a formal quotation by email? Use our quote form
Get Quote now
Three details. No obligation.
Short answer
You need at least one certified test card for each metal type: ferrous, non-ferrous and stainless steel. Each card should come with a certificate showing its material and size. Your HACCP team or your buyer’s code sets the sizes, based on what your detector can reliably find in your product.
Why three metal types
Metal detectors respond differently to different metals. Ferrous metal, such as iron and mild steel, is usually the easiest to detect. Non-ferrous metals, such as brass, copper and aluminium, behave differently. Stainless steel is usually the hardest to detect, especially in wet or salty products, so its test piece is normally larger than the ferrous one. Testing all three proves the detector works across the metals your line could actually shed.
How test card sizes are chosen
- The detector opening. A smaller opening gives better sensitivity, so smaller test pieces can be used.
- Your product. Wet, salty, frozen or foil-packed products make detection harder and can mean larger test pieces.
- Your buyer’s code. Some buyers set the sizes, or the largest size they will accept.
- What the detector reliably finds. Use the smallest sizes your detector detects every time, at the line speeds you actually run.
Set the sizes during commissioning, write them into your testing procedure, and keep them the same until your product, pack or detector changes.
How to use the test cards
- Pass each card through in or on a real pack of your product, not on an empty belt
- Test at the leading edge, the middle and the trailing edge of the pack
- Pass the card through the centre of the opening, which is usually the least sensitive point
- Check that the pack is both detected and rejected
- Record the certificate number of each card with every test
Certificates and condition
Each test card should come with a certificate stating the metal type, the size and the card’s identification. Keep the certificates on file for audits. Inspect the cards regularly: a cracked card, or a test piece that has moved or worn, gives false results and should be replaced.
Certified test cards from PBS
In stock from 0.5 to 5.0 mm, in 0.5 mm steps.
Each card comes with a PDF certificate.
On every order, delivered within a day.
Test cards: common questions
Do we need all three metal types?
Yes, in most audits. Ferrous, non-ferrous and stainless steel behave differently in a detector, so one type alone does not prove that the detector works.
Who decides the test card sizes?
Your HACCP team, following your buyer's code if you have one. The sizes should be the smallest your detector reliably finds in your product.
When should a test card be replaced?
When the card is cracked or worn, or the test piece has moved. We check your cards for damage and certificate dates at every service visit.
How much does a certified test card cost?
LKR 25,000 + VAT per card, including a PDF certificate, with free islandwide courier delivery.
Request a formal quotation
Three quick details are enough to start. Add your product, pack and line speed if you have them and the quote will be exact. Your price is quoted for your exact project, so you never pay for options you do not need.
WhatsApp: 077 132 3424Call: 077 132 3424Email: pbs.metaldetectors@gmail.comBook an engineer visit →Book a consultation →